Procedure for re-installing Nspector on your PDA.

First, synchronize PDA to PC. After synchronization click 'Tools' at top of the ActiveSync menu on your PC, select 'Add/Remove Programs', at the next screen check the 'H. I. Inc. Nspector' box and make sure the 'Installation program into default installation folder' box is checked, then click 'OK'. The program will re-install automatically. When finished start Nspector on your PC and select 'Jobs', open job # 99 or job #100 and at 'HPC' select 'Prepare Job'. Note: before using the PDA you must transfer a job to the handheld. After the successful transfer, you may then start a new job and transfer it to the handheld. This procedure will not cause the loss of your program changes.

Note: The handheld device must be on and synchronized to the PC with no job opened on the PC when retrieving a job from the handheld device.

Note: When opening Nspector on the PDA for the first time you get a message, (There is no application associated with Nspector. Run the application first, then open this file from within the application), do the following. Synchronize PDA to PC click 'Tools' at top of ActiveSync menu, 'Options', check the 'Files' box if not already checked, then 'OK'. The folder 'PocketPC My Documents' will be created in 'My Documents' on your PC if the default PDA name is 'Pocket_PC'. Place the Nspector installation disk in your CD drive and click 'VB Runtime'. Next on your PDA click 'Start', 'Programs', 'File Explorer' then 'My Documents'. Click the 'msvbppc.arm' file, Nspector should open after file download. If your PDA name is not 'Pocket _PC' you will need to copy the 'msvbppc.arm' file from 'PocketPC My Documents' created in 'My Documents' on your PC and paste it in your renamed PDA file, e.g. (PocketPC 2), the name of your PDA.